ELECTRICAL TESTING PRODUCTS BACK PROBE HARNESS CONNECTORS The S & G Tool Aid Corp. 20-piece Back Probe Kit, No.23500, is used to back probe harness connectors, fuel injectors and automotive sensors. The stainless steel probes come in straight, 45 degree and 90 degree profiles in 0.027” and 0.040” diameters. The probes are color-coded for easy identification and are compatible with the standard 4mm plug. Also included with the kit are 12” extension leads, color-coded the same as the back probes for use in recessed areas. All probes are designed to easily insert into automotive connectors. The kit is supplied in a durable, plastic storage case. Enter 259 at “e-inquiry” on VehicleServicePros.com DECEMBER 2016 | ELECTRICAL TESTING SUPPLEMENT | 15 DIAGNOSE AND TRACE SHORT AND OPEN CIRCUITS QUICKLY The General Technologies FaultFinder short/open circuit finder and tracer, No. FF310, is a tool specifically designed to trace and locate short and open circuits, broken wires and current leaks on any electrical circuit with voltages from 6V to 42V. The FF310 set includes one transmitter and one receiver (tracer). The FF310T (transmitter), when connected, injects a radio signal into the faulty circuit or wire, which allows users to trace it with the FF310R (receiver) from several inches away, even when the wires are inside conduits, harnesses, or behind panels and upholstery. The 8” flexible probe allows use in constrained spaces, and a set of fuse blade connectors is provided for convenient connection of the FF310 transmitter in the socket of blown fuses or open circuits. Enter 15 at “e-inquiry” on VehicleServicePros.com MULTIPLE VEHICLE APPLICATIONS The Midtronics Battery Conductance & Electrical System Analyzer, No. MDX-650P, features an integrated printer and provides quick, safe and easy-to-use battery testing capabilities with in-vehicle capabilities to analyze starting and charging systems. This system works on 6V and 12V batteries, and tests 12V and 24V charging systems. This system also offers a quick starter analysis without having to disable the ignition. The MDX-650P package includes the MDX-600 Series Analyzer with integrated printer, MDX-650 software (installed), manual, lead stud adapter set, 10’ cable set and carrying bag. Enter 258 at “e-inquiry” on VehicleServicePros.com M T An qui capab 6V system ignition in adapter PORTABLE JUMP-STARTING POWER The Cal-Van Tools Boost Max, No. 560, offers portable power for jump starting most diesel engines, trucks, cars and more. The 560 can also be used to charge electronic devices, and offers a high-capacity nano Lithium battery for fast charging with low self-discharge cycles (up to 1,500 charging cycles). This tool includes the Intelligent Clamp for jump starting, with built-in safety protection from overcharging and over discharging. This tool also offers live amperage reading. Four different types of charging modes are available, including 5V 2A, 5V 1A, 19V 3.5A and 12V 10A. The Boost Max weighs 1.5 lbs. Enter 257 at “e-inquiry” on VehicleServicePros.com VIEW MEASUREMENTS WIRELESSLY The Lang CAT IV Wireless Clamp, No. 13810, allows technicians to use a smartphone or tablet to view measurements wirelessly. It offers technicians the flexibility to choose from test lead measurements, standard clamp head, or low-amp clamp-on current head. Users can remotely measure and display AC/DC volts, up to 400A, or low amps with mA resolution. The 13810’s transmitter communicates using wireless protocol compatible with smart phones and has an additional wireless RF module built-in for future expansion. Enter 260 at “e-inquiry” on VehicleServicePros.com WORKS WITH ANY 12V BATTERY TYPE The PulseTech 2-Station 12-Volt Battery Recovery Charger, No. SC-2, is designed to recover, charge, maintain and desulfate as many as two 12V lead-acid batteries at a time. This compact and portable recovery charger works with any 12V battery type, including VRLA, AGM, gel and flooded cell. The dual recovery charging stations operate in isolation, allowing any combination of battery brands or types to be recharged simultaneously. The charger’s patented Pulse Technology removes sulfate crystals from the battery plates, increasing the battery’s ability to accept, store and release energy, extending battery life up to five times. The SC-2 features five LED battery-status indicators, replaceable cables, a case and a one-year warranty. Enter 256 at “e-inquiry” on VehicleServicePros.com
FleetMaintenance_NovemberDecember_2016
To see the actual publication please follow the link above