SHOP EQUIPMENT & SUPPLIES
FEATURED
PRODUCT
Protecting personnel from
injury caused by falls
The BayNets Sliding Net Systems by InCord
adds an enhanced level of safety to any
vehicle service center by protecting personnel
from injury caused by accidental
tripping, slipping or walking into an open
work pit. The high-strength net cover opens
from either end of a bay, is easy to install,
operate and maintain. BayNets are custom
sized and configured to work with raised or
lowered drain pans, jacks and similar service
pit hardware. Service pit cover installation
complies with U.S. Occupational Safety and
Health Administration (OSHA) safe walking
working surface requirements. BayNets
is easily adaptable to rail, bus and virtually
all commercial fleet maintenance facilities.
For more information visit
VehicleServicePros.com/12242961
FEATURED
PRODUCT
84 Fleet Maintenance | September 2018
860-537-1414
baynets.com
Helps prevent slip-and-fall accidents
The SpillTech Floor Grabber Absorbent Mat is a safe-floor solution that sticks
tight and flat to the floor and is designed to help facilities prevent slip-and-fall accidents.
This mat features an absorbent top layer that absorbs leaks, drips and spills
around machinery and captures dirt and moisture tracked in by employee and customer
traffic. The adhesive back holds tightly to the floor, but can be easily pulled up
for replacement or relocation, according to the company. Floor Grabber is available
in rolls and pads, and can be cut to fit any space.
For more information visit VehicleServicePros.com/20978937
Adapter kits for heavy
duty in-ground lifts
Stertil-Koni Heavy Duty
Inground Lift Adapter Kits are
tailored for in-ground scissor and
piston lifts – each engineered to
facilitate more efficient lifting by
engaging the front and rear lifting
points on buses and trucks. One
kit is expressly manufactured for
transit buses and another is suitable
for both trucks and school
buses. Stertil-Koni’s school bus
and truck adapters are constructed
to be wider and taller, while transit bus
adapters are flatter and broader. The adapters
are optimized for both new vehicles with
the latest axles and older vehicles that have
been on the road for some time.
For more information visit VehicleServicePros.com/21018381
800-336-6637
stertil-koni.com
Tall profile design for improved ergonomics
The Snap-on IQON Roll Cabinets feature a taller
profile designed for improved ergonomics and work
center visibility. The KCP1422 IQON, the first roll cab in
the series, features three 50” full-width drawers, each
with four bottom supports, so larger everyday-use
tools can be moved from lower to higher drawers for
improved accessibility. The cabs also feature extra
case corner gussets, SpeeDrawer for customizable
drawer divider systems and a PowerDrawer for
in-drawer charging with five offset 110V outlets. The
rugged and fully-welded drawers include ball-bearing
lsides that support up to 227 lbs per drawer and up to
554 lbs on the double slide drawers.
For more information visit VehicleServicePros.com/21005006
Offers dual power input
The HSM200 4-in-1 Synergic Welding System
from H&S Autoshot features Synergic welding
capability and simple scroll-down settings for
steel, aluminum and silicone bronze on a large
LCD display. This system offers dual power input
for MIG, TIG, Stick and Spool Gun operation. The
standard package includes PFC power supply with
LCD screen; HSL15 MIG gun; HSM17 TIG torch with
quick-connect welding cable 12.5’; 200A work clamp
with quick-connecting welding cable 10’; 200-amp
electrode holder with quick-connect welding cable
10’; foot pedal control with direct-connect cable;
115V jump-power cord; dual-gauge gas regulator;
AK-2 torch kit and operator manual.
For more information visit VehicleServicePros.com/20980476
/12242961
/baynets.com
/20978937
/21018381
/stertil-koni.com
/21005006
/20980476