» TOOL S & EQUIPMENT
VehicleServicePros.com/10183868
VehicleServicePros.com/10122033
42 Fleet Maintenance | May 2018
Non-marring corner protectors
The Beta Tools C33 Tool Cabinet
features stainless steel construction
with non-marring corner protectors
to prevent scratching should the
cabinet come in contact with a
vehicle. It also features seven
drawers with fiberglass-reinforced
nylon drawer handles that tilt up
to open; a centralized key-locking
system; and a static load capacity of
2,200 lbs. This cabinet has two fixed
casters and two swivel casters, and
a built-in side bottle tray holder to
keep spray bottles close. The cabinet
is available in orange, red and gray
and is also available in a six and eight
drawer model.
For more information, visit
VehicleServicePros.com/20997727
Separates mid-cable
coupler from cable end
The Cornwell Tools E-Brake Cable
Pliers, No. SLC10500, is heat-treated
and 14” long to safely separate the
mid-cable coupler from the cable
end. The SLC10500 is designed for
Chrysler, Ford and GM light and
medium duty trucks, vans and SUVs
1980 to present.
For more information, visit
VehicleServicePros.com/21000022
Removable battery design for all-day operation
The Clore Light-N-Carry 1,500 lm Flood Light, No.
LNC2251, offers advanced COB technology for clean output,
no sharp edges and long run-times. This light features
a 1,500 lm max output with three light settings and a
four-hour run-time on high setting. Other features include
a removable battery design with two batteries included
for all-day operation, USB power bank for charging small
electronics, wall charger with braided cable and IP64 dust/
water ingress protection. This light includes a one-year
limited warranty and a repair service coupon for one-time,
fixed-fee repair after the warranty period.
For more information, visit VehicleServicePros.com/21001159
For easy
swapping of
air tools
The Polyvance
6040 Whip
Hose is designed
to allow technicians
to easily
swap their air tools.
The 10’ hose attaches
to the air manifold
on Polyvance’s nitrogen
plastic welders using a 1/4”
male NPT swivel connector. The hose
offers an in-line air blower for blowing off dust or force
cooling welds. The hose is terminated with a 1/4” NPT male
fitting that is ready to accommodate the shop’s preferred
quick-disconnect fitting. The hose is made of a soft, light
and flexible rubber for ease of use and handling.
For more information, visit VehicleServicePros.com/20998731
Removes heavy
carbon deposits
The ATS Chemical 3C
Intelligent Induction
Cleaner removes heavy carbon
deposits from the gasoline
based internal combustion
engine. The 3C gasoline
engine cleaning system is
specifically designed for the
ATS 3C carbon removing
chemicals. The 3C microprocessor
is programmed with a
run profile that commands the
3C chemical to be delivered into
the gasoline based induction system
where it can best reach all carbon
sites within the engine. The 3C system
quickly attaches to an induction port on
the engine, then delivers a customized
measured amount of carbon chemical in timed intervals,
removing heavy carbon deposits from the induction system
and combustion chambers.
For more information, visit VehicleServicePros.com/20998743
Identify noise and vibration concerns
The NVH Kit from Pico Technology works with PicoScopes to quickly
identify the source of noise and vibration concerns. Sophisticated
software quickly pinpoints the source of the problem and the kit can
be enhanced with accessories to also allow on-vehicle driveline balancing,
according to the company. The NHV Kit is available in the following
options based on user needs: Starter Diagnostics Kit (No. PQ126),
Standard Diagnostics Kits (No. PQ129), Advanced Diagnostics Kit
(No. PQ120), Essential Starter Kit (No. KP249), Essentials Standard
Kit (No. PQ123) and Essentials Advanced Kit (No. PQ109).
For more information, visit VehicleServicePros.com/12140752
/10183868
/10122033
/20997727
/21000022
/21001159
/20998731
/20998743
/12140752
/www.kdtechnicalinnovations.com
link
/www.slec.com
link
